"=" "> It is important to make sure that the wavelength of the 3D resin corresponds to that of your 3D printer and that it has the specific parameters to be able to print properly. Consult your local promoter for the printing settings for your 3D. Printer. Features:
Introduction:
The following instructions for use are intended for dental professionals who use these
Resins as a material for long -term provisional dental restorations. These instructions
Use also provides information on safety and environmental aspects. If you need more
Information, contact the manufacturer.
Our products are part of a global concept of 3D printable materials based on resin
And should only be used with recommended printers and equipment, following the instructions.
manufacturer.
Please note that using non -compliant devices may compromise the functionality of
restoration. The user is solely responsible for the correct application, which escapes the manufacturer's control.
The manufacturer declines any responsibility for damage caused by improper use.
Planned use:
These resins are photopolymerized resins based on methacrylate-acrylate used by a dentist or a technician.
Dental for the manufacturing of a long -term provisional fixed crown, bridges without pontic,
Inlays, onlays, facets and artificial teeth for complete/partial prostheses with 3D LCD/DLP printers.
Contraindications:
This resin is contraindicated for the following applications:
• Maryland bridge
• All forms of cantilever bridges and pontic bridges
• Patient bruises
• These resins should not be used for purposes other than those indicated. Any gap in relation to these
These indications can have negative effects on the physical and/or chemical qualities of the resin and
Biocompatibility of the final product.
• Do not use the product if you have a known allergy to one or more ingredients.
• In case of doubt, clarify and exclude a possible allergy using a specific allergy test.
Before using this resin.
Safety instructions:
• Precautions/Protection
It is essential to wear protective clothing when handling this product. Safety glasses should be used
and nitrile gloves. You will find more information on handling the product in the product technical sheet.
Security (FDS). We cannot completely exclude the possibility of undesirable effects (for example intolerance or
allergies) to specific components of the material for all people. In these isolated cases, the user
You should stop using the equipment.
• Danger notices according to MSDS
Danger pictograms
Software
Autodesk Netfabb, Composer, 3D sprint, Rayware, DS Slicer, Alpha 3D, Chitubox, Lychee Slicer
- Post-ducting unit
Suggreed hardening machines:
• Armaresin Powercure • Prodex BL toothpace • Optics NK - Otoflash • Formlabs - Fabcure
• Brilliant - accucing • Rapidshape - Healing
And all other hardening machines.
Treatment:
The following instructions contain details on a validated workflow for the printing process.
3D with a compatible 3D printer.
The ideal work temperature of this resin is between 5 ° C and 28 ° C.
Before the first use, you should wave the material well for about 2 minutes. During the decantation, make sure that the resin
Printing is exposed to daylight as long as possible.
For subsequent treatment - resin selection, material parameters, configuration of the
Printing work - As part of the printing process, follow the instructions for the use of the printer
corresponding.
Cleaning and preparation for post-ducting:
• Cleaning
Wash the parts in pure isopropyl alcohol at least 98 % (IPA) in a well -ventilated place. THE
Better results are obtained with pre-lavery and post-lavement.
- Pre -winning bath with ultrasonic cleaning appliance: 1 minute.
- IPA post-laid bath: 1 minute.
Important: be sure to use a specific IPA bath for washing resin parts.
Do not wash with IPA having already been used to wash other materials. Leave the pieces
Dry completely before continuing hardening.
Please note: the entire cleaning process should not take more than 3 minutes, otherwise it could
have a harmful effect on the surface of printed objects (swelling or irregularities in
surface of the object with ethanol).
After cleaning, clean the parts. Leave to dry the printed parts at room temperature
atmosphere.
• Post-ducting
1. After washing and drying, let the parts printed rest for at least 10 minutes to guarantee
that there remains no trace of alcohol.
2. Place the printed parts in the UV drying unit for 15 minutes with the power level 16 and
The level of signaling at 10.
3. If you use NK Otoflash optics, polymerize the 4000 resin flashes on both sides. After the first
4000 flashes, let the material cool for 2 min at room temperature. Then perform
The second 4000 flashes on the reverse.
Posture is a UV light treatment to ensure that resin printed parts get a
Optimal conversion of polymers. In this way, the residual monomer is reduced to a minimum and
obtain mechanical properties. We recommend the use of a UV polymerization unit. Place the pieces
inside the room of the UV polymerization unit on the support fence, do not use a plastic tray
inside the room. There is no need to use inert gas.
Finishing
Remove any residual support structure and finish the hardened parts, if necessary, using methods
and conventional dental instruments. Use specialized rotary instruments to machine and
Polishing of plastics. Make sure not to exceed the maximum speed of rotation suggested by the
instrument manufacturer during the finish.
Storage conditions, expiration date and transport:
Keep the resin in the original container at room temperature in a dry, fresh and dark place. Close it
container after each use.
The product expiration date is mentioned on the product label as well as the lot number.
Keep in the printer up to 4 weeks with the closed cover or keep in the bottle up to 24 months in
A cool and dark place.
Once the expiration date has passed, the operation of the product is no longer guaranteed. Do not expose
UV rays.
The standard transport conditions apply to this product. There is no transport restriction
linked to dangerous substances.
Waste elimination:
This resin in its polymerized form is not harmful to the environment, so it can be eliminated.
with general waste. This liquid state resin should be treated as chemical waste. They apply
Special elimination requirements, check with your local, federal or other regulatory agencies to obtain advice.
Know the removal requirements.
Advice: When the resin is eliminated in the waste of waste, it can be filled in a plastic bag.
closed transparent with a depth not exceeding 20 millimeters and harden for 15 minutes in a
hardening device with a light wavelength from 385 to 465 nm, then it can be removed
as a polymerized product.
Delivery units:
These resins are available in 1000 gr
Color A1, A2, A3 layer thickness during printing 25-50-100-150 microns
Bending resistance
(ISO 10477)
Temp> 90
Mpa
Wavelength
3D 385 or 405 nm printer
Driving time 15 minutes
Requirements:
- printers
• Asiga - All printers • Ackuretta - All printers • 3D shinning - all printers
• Rapidshape - All printers • Sprintray - All printers
All other open system printers; Microlay, Rayshape, Phrozen, Elegoo, Anycubic, Creality, etc.
