BEGO WIRON-LOT WELL FOR NICKEL CHROME!
Non -valuable Haute Fusion weld for Nickel Chrome alloy.
- Indication: Wiron®-Lot is a nickel supply material intended to weld dental parts in nickel-chrome alloys.
- Allows you to weld crowned and bridges.
Data techniques:
The welding seal must be approximately 0.2 mm and coating with a slight layer of minoxyd (ref. 52530).
Immerately avoid any contact between the fondant and ceramics to avoid the risks of manufacturing ceramics.
Form a founding ball and introduce it into the welding seal.
Upstantly warm the welding part to a sufficient temperature before reaching the working temperature.
- This requires bringing the welding block to a lower temperature of 150 ° C to the working temperature (liquidus temperature + approximately 50 ° C) for a period of 3 to 5 minutes, depending on its size.
- Then heat to obtain the working temperature, which should be used for one minute.
- Once the welding is complete, treat the surface following the instructions for using the alloy used (eg grinding, sanding).
- Use our welding table circular for better comfort.
Weld for all Nickel Chrome alloys.
- Composition Ni 66%, CR 19%, MB 5.3%, if 3.5%.
- 1140 ° C merger interval at 1200 ° C.
- Working temperature 1165 ° C.
Delivery :
Wiron Lot weld - 1 bags 6 baguettes.
