Eco-Cryl, thermo acrylic resin polymerized microwave.
For total and partial dental prostheses.
- Plastic and malleable consistency.
- Without cadmium.
- Unalterable color.
- Resistant to alcohols, fruity drinks and dental cleaning products.
- This product can be used for any type of tooth, acrylic or porcelain.
Eco-Cryl resin: user manual:
Dress swelling time for 10 -20 minutes, at a temperature of 22 ºC.
- Proportion for 1 prosthesis: 21 g powder / 18 ml liquid.
- For 2 prostheses: 42 g powder / 36 ml liquid
- Use the doses provided with the product.
As soon as the material, after swelling, no longer sticks to the fingers, it can be used for 15 minutes, at a temperature of 22 ºC.
ECO-CRYL resin Preparation of the MOUFLE:
Prepare the plaster in a Special microwave mitte with keyboards or screws, eliminate wax with hot water.
- For the microwave polymerization, use an appropriate mit on microwave.
- Never put a bronze mit on a microwave.
- Put the plaster of a separator varnish.
- Let dry.
For the filling of the higher counterpart of the mitt, we recommend the use of a fluid plaster that does not require any vibration.
To ensure the connection with the resin, to turn off the teeth well and wet with the monomer.
Eco-Cryl resin Preparation of the dough:
- Dose the powder and liquid in the recommended proportion.
- Spatulate for about 60 seconds, avoiding introducing air into the mixture.
- Cover the container and let stand 10-20 minutes to let the resin swell.
- The consistency then becomes malleable and the resin does not stick to the fingers.
- From this moment, the resin will remain malleable for a maximum of 30 minutes. (in a closed container and at a temperature of 22 ºC).
Eco-Cryl Resin Filling and pressing of the mitte:
Introduce the dough into the lukewarm mut (40 ºC) and then cover with a sheet of cellophane.
- Slowly close the moufle, then reopen it to remove the excess dough.
- Close it slowly after removing the cellophane sheet.
- Put the found in press for about 10 minutes.
ECO-CRYL Polymerization resin:
has) Standard polymerization: Place the moufle in lukewarm water (30-40 ºC).
- Bring to a boil and boil for 20 minutes.
- Make sure the container contains at least 3 liters of water.
- To polymerize several mittens at a time, count at least 2 liters of water per mitt.
- After polymerization, the mitt must cool 30 min in the open air.
- Then plunge the moufle into cold water.
b) Microwave polymerization: Introduce the special moufle into the microwave and heat it for 3 min at a power of 700 W.
After polymerization, the mitche can be put directly in cold water for 45 minutes.
The microwave mitte is made of heat-conductive plastic of heat which ensures progressive cooling without contractions of the resin.
- Polishing classic method.
- Residual monomer <1.5%.
- Store in a maximum dry place 25 ° C.
- Store away from light.
- ISO standard: ISO 20795-1: 2013.
Delivery: Eco-Cryl M resin for microwave cooking or classic - to choose from.
