Palaferm insulation between plaster or resin models and methacrylic resins.
Good insulation is essential to guarantee a precision adjustment of dental prostheses.
Palaferm has been specially developed for the insulation of acrylic resins and resin models.
- Also suitable for insulation of plaster models.
- Applied in a single layer on the resin.
- Produces a very thin insulating film.
- Easy to remove movie manually.
- Adaptable for printed models.
Kulzer insulating palaferm indications:
- A single necessary application on acrylic resins.
- Fast drying.
- Training of a very thin insulating film.
- Protection of non -polymerized materials against external contaminants.
- The insulating film can easily be removed from the resin.
Kulzer insulating palaferm user manual:
- Full cleaning the model, removing wax residues and other materials.
- Place the required amount of material in a container.
- If you isolate resin -based models, apply a single layer of palaferm using a soft brush.
- If you isolate plaster models, apply two layers of palaferm using a soft brush.
- Wait until the first layer of insulation is completely dry before applying the second layer.
- Optimal insulation can be obtained thanks to a uniform application on a cooled plaster/resin model.
- Palaferm dries in 2 to 4 minutes depending on the thickness of the applied layer and the ambient temperature.
- Prosthetic resin must be applied immediately after full drying.
- Be sure not to generate beads or create excessive residues.
- Advice: Dry plaster models should be moistened with water before insulation (approx. 5 to 15 min. Depending on the level of drought).
- Humidification avoids the penetration of air bubbles into the resin during the pressure polymerization process.
- Conservation: Do not use the product beyond the deadline for conservation.
- Keep at a temperature between -1 and 25 ° C.
- Always store in the original packaging.
- After decanation, do not put the residue back into the container.
-
Warning Contains highly flammable solvents.
Delivery: Insulating Palaferm Printed resin model or plaster model - 1 80 ml bottle.
Security form
