Separator Gingifast is a ready -to -use solution.
Allows insulation between surfaces of the same nature by avoiding their memberships.
Separator finds its application in the realization of gingival reproductions on with Gingifast Elastic Zhermack and/or Rigid gingifast Zhermack.
Separator Zhermack is more generally in all cases where it is necessary to prevent adhesion between compatible materials.
- Separator can be applied to condensation silicone (Zetalabor, Titanium) and silicone by addition (Platinum).
- Separator also reduces the inhibition of retication of a-silicone due in contact with incompatible materials (example materials for polyether-based imprint).
- We recommend, in order to obtain the best results and only in the case of polyether -based materials, wait at least 5 hours after taking fingerprint before applying.
- Before applying the separator varnish, polyether imprints must be carefully washed and wiped out by a slight breath of air.
SEPARATOR Zhermack user manual:
The product can be applied either directly to the dry imprint (direct technique), or to possible silicone masks (indirect technique).
- Ensure that the areolated areas are very clean and dry.
- Extend separate with the small brush, or the accessory to spray in the kit.
- Wait for the full drying of separator until the area acquires an opaque appearance.
- Drying can be accelerated by a slight breath of air.
Delivery: SEPARATOR GINGIFAST 2 bottles 10 ml.
With the kind authorization of Zhermack.
Manual
