Varseo Crown 3D Resin for 3D Printer.
The VarseoSmile Crown Plus material is used for permanent restorations such as crowns, inlays, onlays, and veneers, anterior and posterior, including occlusal surfaces.
Printing parameters and implementation specifically developed to ensure perfect fit and consistently reproducible results.
- Chemical and mechanical properties designed for dental prosthetics.
- Versatile use: single crown, inlays, onlays, and veneers.
- Objects already printed with VarseoSmile Crown Plus can be repaired outside the patient's mouth.
- Simple handling without any sedimentation of the resin.
- No need for mixing/shaking with frequent use.
- Easy grinding and polishing with standard tools.
- 7 shades according to the proven VITA* classic color system: A1, A2, A3, B1, B3, C2, D3.
The Varseo Crown Plus resin meets all requirements for a Class IIa** medical device.
- Its full integration into the digital workflow.
- Low material cost per unit print.
- Material validated on numerous 3D printers from renowned manufacturers.
- Outstanding aesthetics thanks to the balanced ratio of opacity and translucency.
- Fluorescence of printed objects similar to that of natural teeth.
- Low tendency to aging and fabrication.
- Very low water absorption.
- Minimal plaque formation thanks to the smooth surface.
- Great comfort due to low sensitivity to cold and heat.
- Antagonist-friendly material, ideal for implant-supported crowns.
- Verified biocompatibility.
Technical Data:
- Shades: A1, A2, A3, B1, B3, C2, D3.
- Density: approximately 1.4 - 1.5 g/cm³.
- Viscosity: 2500 - 6000 mPa.
- Flexural strength: 116 - 150 MPa.
- Elastic modulus: 4090 MPa.
- Duration: >90 D.
- Water solubility: < 12 µg/mm3.
- Layer thickness: 50 µm.
- Wavelength: 385 - 405 nm.
Delivery: VarseoSmile Crown 3D resin, 250g bottle - shades of choice.
